Elitech ATC-800+ temperature controller with a large Three–digit LED LCD display, it has an all-in-one package works with both heating and cooling system. It controls temperature by setting the temperature setting value and the difference value, and when temperature exceeds measuring range, or sensor open circuit or short circuit will alarm warning.
Switch the modes between cooling and heating;
Control temperature by setting the temperature setting value and the difference value;
Refrigeration control output delay protection;
Alarm when temperature exceeds temperature limit or when sensor error.
Temperature measuring range: -50℃ ~ +99℃
Relative humidity: 20% ~ 85% (No condensate)
Resolution: 0.1℃ (-19.9~99℃)
Accuracy: ±1℃ (-50℃ ~ +70℃)
Sensor error delay: 1 minute
Power supply: 220V AC ± 10%, 50/60Hz
Power consumption: <5W
Sensor: NTC sensor (1 PC)
Relay contact capacity: Cool (20A/250VAC); Heat (10A/250VAC)
Ambient temperature: 0℃ ~60℃
Storage temperature: -30℃ ~75℃
Strictly distinguish the sensor down-lead, power wire and output relay interface from another, and prohibit wrong connections or overloading the relay
Prohibit connecting the wire terminals without electricity cut off.
Prohibit using the machine under the environment of over damp, high temperature, strong electromagnetism interference or strong corrosion.
Mounting size: 170mm x 90mm (LxW)
Cable length: 6.6ft /2 M ( including the probe)