Temtop M10 air quality monitor is a simple but powerful air quality detector. The Temtop M10 air quality monitor provides exactly what you need to stay on top of your home air quality levels - no more, no less.
PM2.5 are 2.5 micrometers in diameter or smaller, and can only be seen with an electron microscope. Fine particles are produced from all types of combustion, including motor vehicles, power plants, residential wood burning, forest fires, agricultural burning, and some industrial processes.
HCHO is colorless, poisonous, highly water-soluble gas with an obnoxious odor. Used in the production of disinfectants, preservatives, and hundreds of industrial and consumer products such as adhesives, carpeting, decorative paneling, foam insulation, drapery, fiber and particle boards, and permanent press fabrics.
TVOC is a grouping of a wide range of organic chemical compounds to simplify reporting when these are present in ambient air or emissions. Many substances, such as natural gas, could be classified as volatile organic compounds (VOCs)
For each pollutant an AQI value of 100 generally corresponds to an ambient air concentration that equals the level of the short-term national ambient air quality standard for protection of public health. AQI values at or below 100 are generally thought of as satisfactory. When AQI values are above 100, air quality is unhealthy: at first for certain sensitive groups of people, then for everyone as AQI values get higher.
4 in 1 Multi-functional Design
The monitor makes it easy to take measurements from one room to another in order to get an overview of the concentrations of PM2.5, HCHO, TVOC and AQI in a home, workplace, school, a daycare center or any other location.
The indicator lights on the panel indicate the corresponding air quality. Green: Good | Yellow: Average | Red: Unhealthy
The only home button on the top of the detector, is not only to power on/ off the device.With a click, the interface will change; by double click, the interface will change automatically.
Turn it on and wait for about 10 minutes, use the pin to poke the button until HCHO icon blinks on the screen, then place the detector outside for 10 minutes for ventilation.When HCHO icon does not blink, it indicated that the calibration has finished.
Weight: 198 g
Dimensions: 81*81*30 mm
Battery capacity: 2200 mAh. Battery life: 6 hours
Input voltage: DC 5 V
Input current: 0.5-1 A
Sensor life: 3 years
Battery indicator light
Measuring range: 0~999 ug/m³ ; Resolution: 0.1ug/m³
Measuring range: 0~5mg/m³ ; Resolution: 0.01mg/m³
Measuring range: 0~2mg/m³ ; Resolution: 0.01mg/m³
HCHO: Good( <0.1mg/m³ ) Unhealthy ( 0.1~0.3 mg/m³ ) Hazardous( >0.3mg/m³ )
PM2.5: Good( <75ug/m³ ) Unhealthy ( 75~200 ug/m³ ) Hazardous( >200mg/m³ )
TVOC: Good( <0.6mg/m³ ) Unhealthy ( 0.6~1.6 mg/m³ ) Hazardous( >1.6mg/m³ )
AQI: Good( <100 ) Unhealthy ( 100~250 ) Hazardous( >250 )
Temtop - Professional Indoor Air Quality Monitor
Temtop, a brand under Elitech Technology, Inc, is a technology company specialized in environmental detection. It is dedicated to R&D and innovation of air quality detection technologies. To protect mothers and babies away from polluted air, guard children’s health in their growth, and keep everyone living at an cozy and healthy home and enjoying the quietness and beauty of life, TEMTOP takes LOVE as its incentive and quality products as carrier, continues its effort to push the society to give attention to air quality.