Six Ideas to make your home more energy efficient by using temperature controller

0 comments

By making eco-friendly improvements in your home, you could save up to £300 a year on your bills and help cut carbon emissions. Here are 6 of the top energy efficiency jobs that you could get done in your home, with the help of temperature controller.

Looking for a quicker way to start saving energy and money? Elitech here shares actionable advice that you can implement yourself ahead of winter.

1. Energy-efficient doors

A draughty room is not only uncomfortable to sit in, but it can push your energy bills up as you’re likely to turn up the heating to feel more comfortable indoors. Energy-efficient doors offer great thermal insulation, keeping warm air in and preventing too much cold air from working its way inside.

2. Solar thermal panels

As a renewable energy source, solar thermal energy is great for the environment. Solar thermal panels use a little bit of electricity to capture the sun’s energy and use it for solar water heating. They can provide around half of your hot water use.

In the UK, solar panels are becoming more popular amongst homeowners – there are now 1 million ‘solar houses’ across the nation! You don’t need to have sunny weather all year around for solar panels to work. They still work on cloudy days, too. However, solar panels won’t work to the best of their ability when they’re obstructed by trees, so keep this in mind when you’re deciding where to put them.

Once installed by a vetted heating engineer, solar panels last at least 25 years, making them a great investment for energy efficiency.

3. Double and triple glazing

Double glazing is one of the UK’s most popular types of window, whilst triple glazing is also becoming more sought-after. Double glazed windows are made up of two panes of glass and triple glazed windows have three. Each pane of glass is separated by a gap of insulating air, which reduces the amount of heat that escapes from your house.

The key benefits for both styles are:

  • Less heat loss – all new or replacement uPVC, timber or aluminium windows are required to have a minimum Window Energy Rating of ‘C’.
  • Reduced noise pollution, as they’re more soundproof than single glazing.
  • Increased home security – they’re thicker than single glazing, so are harder to break.

4. Smart heating controls

Smart heating controls are an increasingly popular smart technology tool amongst UK homeowners. They allow you to control and customise your heating with just a tap of your smartphone, tablet or other device.

Smart heating controls can easily help you to improve comfortability in your home and cut down on your energy bill by:

  • Allowing you to create, manage and adjust your heating schedule as often as you like.
  • Alerting you if you leave home but have forgotten to turn the heating off, so that you can quickly turn it off using an app.
  • Spotting trends in how you use your heating and creating an appropriate heating schedule to fit your needs.
  • Reacting to the weather through a weather-response function. This means that your heating will automatically adjust when it’s hotter or colder than usual, without you having to lift a finger.
  • Control your heating room by room using zoning – this means that you won’t waste energy on heating every single room in the house when you’re only using one or two.
  • Working with other smart home technology that you may already have, such as Amazon Alexa or Google Home. This will allow you to control your heating using your voice, for example.

A gas/heating engineer can discuss the different smart heating control systems with you, fit the system that you choose in your home and help you to connect it to your smartphone.

5. Heat pumps: Air source heat pumps (ASHPs)

A source of renewable energy, ASHPs work by absorbing heat from the outside air to heat your home and water. ASHPs can still extract heat even when the temperature is as low as -15°c!

The most popular type of ASHP in the UK is the air-to-water heat pump. They work by absorbing heat from the outside air and transferring it to water. Then, the heat distributes around your home through your wet central heating system.

Air-to-water heat pumps work more efficiently at a lower temperature than a standard boiler system, which not only lowers your carbon emissions, but also cuts your heating bill.

GSHPs extract heat from the ground through a ground loop (a loop of pipe) which is buried in your garden. Heat from the ground is absorbed into a mixture of water and antifreeze in the pipe, and then it goes through a heat exchanger into the heat pump. This fluid then heats your radiators, hot water, underfloor or warm air heating systems.

ASHPs and GSHPs need less maintenance than a gas or oil boiler, and no fuel deliveries are required as they’re a renewable energy source. They also work more efficiently, by delivering heat at a lower temperature over a longer period of time. A gas/heating engineer can evaluate which option is best for your home.  

6. Thermostats and other heating controls

Zone controls

Zoned heating systems allow you to set and control the heating in different areas of your house. Each ‘zone’ is connected to the same boiler, but they each have their own thermostat.

Thermostatic radiator valves (TRVs)

Found on the side of your radiator, TRVs control the temperature of different rooms in different ‘zones’ of your house, by adjusting the flow of water going into your radiator. When the room temperature changes, a capsule in the valve contracts or expands to adjust the temperature of the radiator to the change.

Delayed start thermostat

Many central heating systems have set times for when the heating comes on. However, on days that are warmer than others, having the heating automatically turn on anyway wastes energy and money, by increasing your heating costs. 

A delayed start thermostat automatically delays when the heating comes on if the room is already warm, reducing how long the heating is on during the day.

Hot water tank thermostats and insulation

Your hot water is kept in a hot water cylinder, which keeps it hot and ready for you to use. A thermostat allows you to set the temperature that you’d like your hot water to reach. Once the water reaches that temperature, the thermostat prevents it from exceeding it, as well as turning off the heat supply to stop energy being used unnecessarily.

Heat can be lost through an uninsulated hot water cylinder and the exposed pipes between the cylinder and boiler. Insulating your hot water cylinder is a quick way to save up to £100 per year on your heating bill and cut up to 530kg off your carbon dioxide emissions.

Elitech Temperature Controller can control the heating, cooling, defrosting, fan, lighting devices. Elitech is a professional manufacturer of temperature controller thermostats.  Elitech temperature controller thermostats have been applied in cold storage, freezer, chiller, commercial refrigerator, aquarium, snake rack, seafood machine, aquaculture, hatchery farming, greenhouse planting, brew, ferment, wellness equipment.

Product Link: https://www.elitecheu.com/collections/temperature-controller

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top