Skip to content


Elitech MTC-6040 Temperature and Humidity Controller with Cooling, Fan, Humidity/ Lighting/ Alarm Control Output

by Elitech
Save 77% Save 74%
Original price £38.99
Original price £38.99 - Original price £389.90
Original price £38.99
Current price £9.99
£9.99 - £89.99
Current price £9.99
SKU MTC-6040
Quantity: 1
stock in: UK warehouse

Free Shipping in the UK & EU

Fast Worldwide Delivery

Request a wholesale quote

Clearance Sale

MTC-6040 Only £16.99





Elitech MTC-6040 Temperature and Humidity Controller are widely used in cool cabinets, medicine cabinets, foodstuff freezers, agricultural greenhouses, medicine refrigerators, etc.

Three-way control outputs: compressor, fan, third relay ( 0: no use, 1: light, 2: humidity control, 3: alarm relay)


Model: MTC-6040
Operating Voltage: 220-240VAC, 50/60HZ
Temperature Measurement Range: -40℃-50℃
Temperature Control Range: -50℃-50℃
Temperature Measurement Accuracy: ±1℃
Temperature Display Resolution: 0.1℃
Humidity Display Range: 0%RH-100%RH
Humidity Accuracy: ±3%RH (25℃ )
Humidity Display Resolution: 1
Rated Current of Output Relay (Compressor): 16A
Rated Current of Output Relay (Fan): 7A
Rated Current of Output Relay (Third Relay): 7A
Front panel waterproof level: IP65
Product Dimension: 100*51.5*73.5 (mm)

Customer Reviews

Based on 2 reviews
Tony Le Jean
not exactly plain sailing.

As others have mentioned, this device will only turn on a cooling unit, not heating, so it is not really suitable for what I needed, I thought a normally on relay would sort that out... however, although it will measure temperatures in the range I needed, the 'compressor' or similar cannot be set to a temperature above 20°c. Also there are misleading instructions. If you need to access the "Administration menu settings", you cannot do so as described in the instructions (pressing set and ^). The only way to access that menu is when the device has been turned off, then on again, whilst the unit is flashing in boot up mode, if you press set and ^ at that time, it will go into the admin menu.

Good Controller

It is compact and with good quality. It works well. However I’ll advise the eventual purchasers to read the product characteristics before, since the temperature control only send signals to control refrigeration not to heating as well. It is destined to refrigerating units, obviously. The humidity control works both for humidifying and dehumidifying but the temperature control works only to refrigerate. No problem for me because in this project I need to act over humidity and for the temperatures I only need to verify them and alarm if off limits and this works OK.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare